Home Glass Safety & UV Film Pricing How It Works Insights About FAQ Contact Book a Curated Inspection Estimate Your Cost
Glass Safety Film · High-Security

Glass safety film for high-security sites

VitraGuard 12-mil glass safety film adds a layer that helps control glass fragmentation for banks, government buildings, warehouses, and other security-sensitive sites. If glass is struck or breaks, the film is designed to help hold the fragments together. It is a safety film focused on fragment retention — not a bullet- or blast-rated product.

From AED 117/m² film supply · installation estimated separately
Secured glazed building facade protected by VitraGuard glass safety film
Quick answer

High-security glass safety film is a clear 12-mil anti-shatter film for banks, government, and sensitive sites — designed to help hold shattered glass together and reduce fragmentation on impact. It is not bullet- or blast-rated; where ballistic or blast resistance is required, specialist glazing is needed. Film supply starts from AED 117 per square metre (4 Mil AED 117/m²; 8 Mil AED 141/m²; 12 Mil AED 147/m²), with a 15 m² minimum order and 5% VAT on top. Installation is estimated separately, excluded from the online payment and confirmed after a site visit.

Why It Matters

One layer in a wider approach

Sensitive sites carry large amounts of glass and high footfall. A safety film is one practical layer — focused on fragment retention and impact — that complements the rest of a site's security and safety measures.

  • Impact and fragmentation control for large glazed areas.
  • Sensitive and high-value sites with public access.
  • Glazed facades, entrances, and reception zones.
  • A measured, layered approach to glass safety.
The 12-Mil Film

Focused on fragment retention

Safety film helps retain shattered glass fragments
Helps retain glass fragments

If glass is struck or breaks, the 12-mil film is designed to help hold the fragments together rather than letting them scatter — helping reduce the hazard from flying or falling glass.

Optically clear safety film for facades
Invisible once installed

Optically clear and applied to existing glass — it preserves the appearance of facades, entrances, and reception areas while adding a safety layer.

A layered approach to glass safety
Part of a layered approach

A practical, low-profile measure that complements your wider security and safety planning — honest about what a safety film can and cannot do.

An honest note: VitraGuard glass safety film is a fragment-retention safety film. It is not a bullet-resistant or blast-rated product. For ballistic or blast-rated requirements, specialist security glazing is needed — we are happy to advise on what the film does and does not do.
Across the Site

Where we typically apply it

Glass safety film comparison — fragments held together versus loose, scattered glass
  • Bank & branch glazing
  • Government & civic buildings
  • Reception & screening areas
  • Warehouse & facility glass
  • Glazed facades & entrances
  • Sensitive or high-value sites
Transparent Pricing

No hidden pricing

From AED 117per square metre · film supply, delivery included

4 Mil AED 116.67/m² · 8 Mil AED 141.07/m² · 12 Mil AED 147.20/m². Minimum order 15 m²; 5% VAT added on top. Online payment covers film supply only — installation is an estimate (AED 400/m² up to 10 m², AED 280/m² for 11–20 m², quoted above 20 m²), confirmed after a site visit. Security-sensitive sites are confirmed per project with a survey for area, access, and any specific requirements.

High-Security FAQ

Common questions

It is a transparent film applied to existing glass that is designed to help hold shattered glass together and reduce fragmentation on impact, adding a layer of glass safety for sensitive and high-value sites.
No. VitraGuard glass safety film is a safety film focused on fragment retention and impact — it is not a bullet- or blast-rated product. For ballistic or blast-rated requirements, specialist security glazing is needed. We are happy to advise honestly on what the film can and cannot do.
Film supply starts from AED 117 per square metre — 4 Mil at AED 116.67/m², 8 Mil at AED 141.07/m², and 12 Mil at AED 147.20/m² — with a 15 m² minimum order and 5% VAT on top; delivery is included. Online payment covers film supply only. Installation is an estimate (AED 400/m² up to 10 m², AED 280/m² for 11–20 m², quoted above 20 m²), excluded from the online payment and confirmed after a site visit. Security-sensitive sites are confirmed per project with a survey. See the pricing page for the film rates.
Anti-shatter film can form part of a wider glazing-protection approach. Anchoring and security-rated systems are separate specifications — we scope honestly against your security brief, or tell you when specialist glazing is the right answer.
No. The film adds fragment retention and impact mitigation to existing glass; it is not a substitute for ballistic, blast, or forced-entry-rated systems where those are required.
Book Inspection Estimate Your Cost